SatisGeo PMG-2 is an affordable, robust, reliable, and easy-to-use magnetic subsurface surveying and mapping instrument. The well-known proton precession method provides accurate measurements without being affected by sensor orientation, temperature, or position. Thanks to its intuitive and straightforward operation, untrained personnel can operate it. Optional GPS allows data to be stamped with geo coordinates shown in UTM format during measurement.

  • High resolution
  • Excellent accuracy
  • Profile/base station measurement
  • Wide range of measured fields
  • Internal FLASH memory up to 1.8 million readings
  • Vertical or horizontal gradient configuration
  • USB interface
  • Optional GPS
  • Mineral exploration
  • Archaeology
  • Ferrous ordnance detection
  • Buried pipe’s location
  • Environmental studies
  • Magnetometer:
    A cost-effective option for measuring the absolute value of the Earth’s magnetic field (20,000-100,000 nT) and its daily variations.
  • Gradiometer:
    A two-sensor version that can measure the vertical and horizontal gradient of the Earth’s magnetic field (±1 000 nT/m). The horizontal or vertical gradient of the magnetic field between the two sensors is determined by subtraction.
  1. MANUAL:
    • One-button manual start of measurement.
    • Ideal for spot or grid measurements.
    • Allows setting of line and position with automatic position incrementation.
    • Supports gradient measurement in the gradiometer version.
    • The GPS position is stored if the GPS is active.
  2. WALK:
    • Designed to map large areas with external GPS.
    • Automatic measurement at adjustable intervals (0.5 s, 1 s, 1.5 s, 2 s, 2.5 s and 3 s).
    • Supports gradient measurement in the gradiometer version.
  3. AUTO:
    • A mode for long-term measurement of daily variations of the Earth’s magnetic field.
    • Setting measurement intervals from 5 s to 24 h (with 1 second resolution).
    • Gradient measurement is not available in this mode.
Battery Non-magnetic Li-ion battery (14.8 V / 6 Ah) with a minimum of 12 hours of operations in gradient mode. The battery capacity can be doubled on demand.
Memory for more than 1,800,000 measurements, ideal for large-scale projects.
Measurement range 20,000 – 100,000 nT (gammas).
Absolute accuracy ± 0.2 nT.
Resolution 0.01 nT.
Sensitivity (AUTO, MANUAL, WALK @ > 1.5s) 0.1 nT.
Gradient range 1,000 nT/m.
Communication USB 2.0, External GPS
Dimensions 230 x 80 x 170 mm
Console weight 2 kg, including battery.
Sensor dimensions  Ø80 x 200 mm
Sensor weight 0.7 kg
Temperature range -10 °C – +50 °C

The PMG-2 can be equipped with an external GPS receiver based on accuracy and budget requirements:

  • Ublox 7 GPS:
    • 56 channels with GPS/QZSS, GLONASS, SBAS (WAAS, EGNOS, MSAS) support.
    • Accuracy:
      • Position (GPS/GLONASS): 2.5 m CEP / 4.0 m CEP.
      • SBAS: 2.0 m CEP.
  • Types of antennas:
    • Calian TW3101: Non-magnetic antenna, installation on a pole with sensors.
    • Ublox ANN-MS: A modified, more affordable antenna housed in a cap.

The PMG-2 does not need calibration in principle and provides absolute magnetic field values.

  • 1 x PMG-2 console with built-in battery.
  • 1 x Sensor in magnetometer variant or 2 x sensors in gradiometer variant
  • 1 x Foot stick
  • 4 x Middle stick
  • 1 x Horizontal gradient stick for the gradiometer variant
  • 1 x Anchor ring with strings.
  • 3 x Tent pin for anchoring
  • 1x Harness
  • 1 x Instruction Manual
  • 1 x USB cable
  • 1 x USB FLASH with operator program
  • 1 x Transport case

If you ask for a quote or have another request, please use the buttons above. You can also send an email, or give us a like on Facebook and write a comment.